Premium windows, doors & roof glazing · Made to measure · UK-wide delivery

01924 929600|Help & Guides|Design Online|Contact

Buying guide · Energy efficiency

U-Values & Building Regulations Explained

When you buy new windows, doors or roof glazing you will see U-values quoted everywhere. Here is what they mean, why they matter and how they relate to Building Regulations.

What is a U-value?

A U-value measures how easily heat passes through a window, door or rooflight, in watts per square metre per degree (W/m²K). The lower the U-value, the better the product is at keeping heat in.

Centre-pane vs whole-unit U-values

You will often see two different figures:

  • Centre-pane U-value – the glass alone, measured in the middle of the pane. For example, our standard Low E double glazing has a centre-pane U-value of 1.2 W/m²K.
  • Whole-unit U-value – the complete window or door, including the frame, spacer bars and glass. This is the figure Building Regulations use, and it is usually higher than the centre-pane figure.

Whole-unit values depend on the size and layout of each product. If you need them for building control, contact us with your order details.

What do Building Regulations require?

In England, Approved Document L (Conservation of fuel and power) sets limits for new and replacement windows, doors and rooflights in existing homes. At the time of writing, the limiting whole-unit U-values are broadly 1.4 W/m²K for windows and doors and 2.2 W/m²K for rooflights and roof lanterns. Wales, Scotland and Northern Ireland have their own rules, and requirements for new-build homes are different.

Regulations change, so always check the current requirements for your project with your installer or local building control.

Who signs off the work?

Replacement windows and doors in England and Wales must usually be fitted by an installer registered with a competent person scheme (such as FENSA or Certass), who can self-certify the work – or the work must be approved by local building control. New openings and extensions normally need building control approval.

We supply only, so please make sure your installer or builder deals with Building Regulations for your project.

Other things that affect comfort

  • Thermally broken frames – all our aluminium systems use a thermal break to stop heat escaping through the metal.
  • Solar control glass – used in our roof lanterns and flat rooflights to reduce heat build-up in summer.
  • Good installation – gaps, poor sealing and missing insulation around the frame can undo the performance of the best products.

Ready to order?

Browse made-to-measure sizes with prices shown up front, or design a bespoke size online.